Overview
Casting of replacement components is a Solids Handling Machinery application handled with cold-applied Belzona repair composites and protective coatings, supplied and applied in place, typically with no hot work and no shutdown. As the authorized Belzona distributor for South Texas and the Gulf, our team specifies the right system, then supplies it, applies it, or both.
Recommended systems for this work include Belzona 2131.
What tends to go wrong in Solids Handling Machinery: Sliding-abrasion wear on screw flights, conveyor troughs, and chute liners. Slurry erosion on pump volutes, impellers, and discharge elbows.
What this covers
- Creation of drive couplings
- Casting of new components such as shock absorbers, flexible mods and guide bearings
- Repair of lobe pumps by casting new lobes to original dimensions
Recommended Belzona Products (1)
About Solids Handling Machinery
Abrasive wear on screw flights, conveyor troughs, slurry-pump volutes, and cyclone cones drives the maintenance scope on solids-handling equipment. Belzona's ceramic-filled epoxy and elastomeric polyurethane systems restore the original wear profile and apply a sacrificial surface that lines up with the next planned outage.
Explore all Solids Handling Machinery applicationsRelated Solids Handling Machinery applications (6)
Have this on your asset?
Our Houston-based team will recommend the right Belzona system and supply or apply it, with 24-hour support, no shutdown, no hot work. We serve Houston, the Texas Gulf Coast, South Texas, and offshore in the Gulf from our Alvin, Texas headquarters.