Belzona 2211
MP Hi-Build Elastomer
A flexible multi-purpose polyurethane elastomer for the repair, rebuilding and coating of rubber components and metal surfaces.
A 2-part polyurethane resin for high-build flexible rubber repair and coating with up to 1000% elongation.
- SeriesBelzona 2000 Series
- Documents6
Overview of Belzona 2211
A 2-part polyurethane resin designed for the repair, rebuilding and coating of rubber and metal components. This flexible rubber repair material makes cost effective repairs possible and is appropriate for applications where high build, durability and elasticity are required. This 100% solids elastomeric material is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work.
Key Benefits
Outstanding elongation enabling flexibility for moving and dynamic surfaces
Cures at room temperature with no hot work or vulcanisation
Protects against erosion and corrosive attack
Bonds to natural rubber, nitrile, neoprene, SBR, polyurethane, PVC, steel, copper and concrete
No solvents, no shrinkage during cure
Small or large areas treated in one operation with no joint lines
Application Areas
What this product handles, grouped by equipment area, each links to the full application.
Floor Problem Areas
4 applications- Expansion & building joint sealingSealing of leaking joints in secondary chemical containment areasLearn more
- Cold-applied rubber repairCold-curing alternative to vulcanized rubber repair of rubber liningsLearn more
- Joints in floors/walkwaysExpansion joints in floors, walkways, and structural decks are designed to move under thermal and live load…Learn more
- Walls, floors, concrete jointsConcrete construction joints, control joints, and crack openings move with thermal cycling and substrate loading…Learn more
Gaskets, Seals & Shims
2 applications- Gaskets, seals, shimsCustom gasket fabrication for irregular flange faces, salvaged seals on legacy machinery, and field-formed shims that have to match an out-of-flat mating surface all run into the same problem…Learn more
- Rubber parts, fendersMarine fenders, conveyor skirting, and chute liners take impact and abrasion on rubber components that ordinary patching cannot bond reliably to…Learn more
Engines & Casings
1 applicationTechnical Data
Mechanical Properties (ASTM D412 Die C)
- Tensile Strength (24 hr cure)
- 900 psi / 6.2 MPa
- Tensile Strength (7 day cure)
- 1500 psi / 10.34 MPa
- Tensile Modulus (7 day cure)
- 53 psi / 0.365 MPa
- Elongation (24 hr cure)
- 1000%
- Elongation (7 day cure)
- 1000%
- Shore A Hardness (24 hr cure)
- 69
- Shore A Hardness (7 day cure)
- 73
- Tear Strength (24 hr cure, ASTM D624)
- 190 pli / 3392 kg/m
- Tear Strength (7 day cure, ASTM D624)
- 230 pli / 4106 kg/m
- Compression Set (BS 903 part A6, 30 min recovery)
- 35%
Adhesion (ASTM D429 90° Peel, Grit Blasted Mild Steel)
- Maximum Adhesion
- 171 pli / 3053 kg/m
- Average Adhesion
- 159 pli / 2844 kg/m (Cohesive in Elastomer)
Abrasion Resistance (Taber ASTM D4060, H18, 1kg load, 7 day cure)
- Wet
- 180 mm³ loss per 1000 cycles
- Dry
- 400 mm³ loss per 1000 cycles
Expansion Joints
- Qualified as a Class 25 sealant for ±25% movement (modified ASTM C719) on concrete and steel substrates with appropriate conditioner.
Electrical Properties
- Dielectric Strength (ASTM D149)
- 6.4 kV/mm at 500 V/s
- Dielectric Constant (ASTM D150)
- 5.8 at 1.0 V and 100 Hz
- Volume Resistivity (ASTM D257)
- 8.08 × 10¹⁰ Ωcm at 500 V DC
Working Life
- At 68°F (20°C)
- 15 minutes
Curing Time
Cure times will be reduced for thicker sections and extended for thinner applications. At a thickness of approximately 0.10 in. (0.25 cm), allow to solidify for the times shown in the Belzona IFU.
At 68°F (20°C)
- 24 hour cure
- Shore A 69
- 7 day cure
- Shore A 73 (full cure)
Service Temperature Limits
Note: Surface conditioning with Belzona 2911 (Elastomer QD Conditioner) or Belzona 2921 (Elastomer GP Conditioner) is required for proper adhesion.
- Service Range
- -40°F to 150°F (-40°C to 65°C)
- Application Temperature
- 41°F-104°F (5°C-40°C)
Mixing & Application
Product PDFs
Safety data downloads straight away. Tell us where to send the specification sheet and the instructions for use and they arrive by email in seconds.
- Product Flyer(opens in a new tab)
Instructions for Use (IFU)Request
Specification SheetRequest
- Safety Data, Base (GHS)(opens in a new tab)
- Safety Data, Solidifier (GHS)(opens in a new tab)
- Chemical Resistance Chart(opens in a new tab)
Gallery
Related Products
Need Belzona 2211 applied
on your asset?
Belzona Houston, the authorized Belzona distributor for South Texas and the Gulf, supplies and applies Belzona 2211, with 24-hour support, no shutdown, no hot work.