Plant Floor Anti-Slip Safety Resurfacing
Worn, slick plant walkway repaired and resurfaced with an anti-slip safety floor for dependable footing.
A job completed with Belzona. This describes what the Belzona system does and how it goes on, not a record of a specific project by this distributor.
The challenge
A heavily traveled plant walkway had worn smooth and slick over time under steady foot and cart traffic. The original surface profile was polished away, spills and process residue collected in the low spots, and the floor no longer gave anyone reliable footing. A slick walkway is a slip hazard, and on a busy floor that means a real risk of injury to the people who use it every shift. The plant needed the surface made sound again and brought back to a condition that holds traction even when it is wet or contaminated.
The Belzona approach
Work starts by walking the floor with the plant to map the worn and damaged areas and confirm what the surface has to stand up to in daily traffic. The substrate is prepared back to a clean, sound, profiled surface so the new system bonds, and the worn and broken spots are repaired to bring the floor back to an even base. A 4000 Series anti-slip safety floor then goes down with an aggregate texture built in so the finished surface grips underfoot. It is laid as a continuous surface keyed to the traffic the walkway carries and left to cure before the floor goes back into use.
- Assess and mapWalking the walkway with the plant maps the worn, slick, and damaged areas and confirms the traffic and conditions the surface has to handle.
- Surface preparationThe substrate is prepared back to a clean, sound, profiled surface so the repair material and the safety floor bond properly.
- Repair the surfaceThe worn and broken areas are patched and rebuilt to bring the walkway back to an even, sound base.
- Apply the anti-slip floorA 4000 Series anti-slip safety floor with a built-in aggregate texture is applied as one continuous surface across the walkway.
- Cure and return to serviceThe floor cures, the finish is checked for even traction, and the walkway goes back to the plant ready for traffic.
The result
- Worn and slick walkway repaired and resurfaced without replacing the floor
- Anti-slip texture built into the surface for dependable footing when wet or contaminated
- Floor laid as one continuous surface keyed to the traffic it carries
- Walkway returned to service safer underfoot by factory-trained and factory-certified Belzona applicators
In the field
More Manufacturing & General Industry projects
Gearbox Housing Bearing Bore Rebuild
Spun, worn-oversize gearbox bearing bore rebuilt cold and reformed back to dimension without machining a new housing.
Compressor Casing Crack and Leak Repair
Cracked, weeping compressor casing sealed and the cracked section rebuilt cold, with no hot work to risk the casting.
Kiln Trunnion and Tire Seal Repair
Worn kiln trunnion roller and bearing seats rebuilt cold and dressed back to the running line, with the hot seal area coated for protection.
Seeing something like this?
Belzona Houston is the authorized Belzona distributor for South Texas and the Gulf, based in Alvin, Texas, we’ll survey your equipment and recommend the right cold-applied Belzona system, with 24-hour support.