Overview
Splash-zone & immersed corrosion protection is a Ships & Maritime Structures application handled with cold-applied Belzona repair composites and protective coatings, supplied and applied in place, typically with no hot work and no shutdown. As the authorized Belzona distributor for South Texas and the Gulf, our team specifies the right system, then supplies it, applies it, or both.
Recommended systems for this work include Belzona 5831, Belzona 5831LT.
What tends to go wrong in Ships & Maritime Structures: Splash-zone corrosion on hull plate, pilings, and structural members in the wet/dry tidal cycle. Ballast-tank coating breakdown from cyclic immersion and crevice corrosion.
See Belzona in action
What this covers
- Prevention of corrosion and deterioration of metallic substrates in splash zones and underwater areas
- Prevention of corrosion and deterioration of metallic substrates in splash zones, pipework, tanks, bunds and clarifiers
- Protecting submersible pumps, valves and transformers from the effects of galvanic corrosion
Recommended Belzona Products (2)
About Ships & Maritime Structures
Marine and maritime repair work is constrained by class society approvals, the splash-zone tide cycle, and the cost of dry-docking. Belzona's surface-tolerant and immersion-grade systems are selected to fit those constraints: applied to damp or oil-contaminated steel, cured at ambient temperature, and built around products with vessel-side approvals tied to specific product codes.
Explore all Ships & Maritime Structures applicationsRelated Ships & Maritime Structures applications (9)
Have this on your asset?
Our Houston-based team will recommend the right Belzona system and supply or apply it, with 24-hour support, no shutdown, no hot work. We serve Houston, the Texas Gulf Coast, South Texas, and offshore in the Gulf from our Alvin, Texas headquarters.