Overview
Shimming & equipment reseating is a Valves, Pipes & Fittings application handled with cold-applied Belzona repair composites and protective coatings, supplied and applied in place, typically with no hot work and no shutdown. As the authorized Belzona distributor for South Texas and the Gulf, our team specifies the right system, then supplies it, applies it, or both.
Recommended systems for this work include Belzona 1111, Belzona 1121, Belzona 1151, 6 recommended Belzona products in total.
What tends to go wrong in Valves, Pipes & Fittings: Flange face corrosion and erosion , including raised-face and ring-type-joint surfaces that no longer seat a gasket. Live leaks at threaded joints, weld pinholes, valve packing glands, and gasketed connections.
See Belzona in action
What this covers
- Shimming and reseating of irregular equipment
- Creation of irregular load bearing shims and reforming of bearing housings
- Load bearing shims
Recommended Belzona Products (6)
About Valves, Pipes & Fittings
Most valve, pipe, and fitting repairs have to fit inside a turnaround window or, more often, around a system that cannot be shut down at all. Belzona supplies cold-cure repair composites that rebuild flange faces, seal live leaks, and reinforce pipework while the line stays under pressure.
Explore all Valves, Pipes & Fittings applicationsRelated Valves, Pipes & Fittings applications (13)
Have this on your asset?
Our Houston-based team will recommend the right Belzona system and supply or apply it, with 24-hour support, no shutdown, no hot work. We serve Houston, the Texas Gulf Coast, South Texas, and offshore in the Gulf from our Alvin, Texas headquarters.