Overview
Pipe bend & elbow lining is a Chutes & Hoppers application handled with cold-applied Belzona repair composites and protective coatings, supplied and applied in place, typically with no hot work and no shutdown. As the authorized Belzona distributor for South Texas and the Gulf, our team specifies the right system, then supplies it, applies it, or both.
Recommended systems for this work include Belzona 1381, Belzona 1811, Belzona 1812, 5 recommended Belzona products in total.
What tends to go wrong in Chutes & Hoppers: Sliding abrasion on chute floors and discharge surfaces under continuous bulk flow. Impact damage at transfer points, drop zones, and discharge gates.
See Belzona in action
What this covers
- Pipe elbows and large-diameter pipework
- Pipe bends and elbows in high-temperature service
- Pipe bends and elbows
- Pipe linings and girth welds
- Penstocks and jet tubes
Recommended Belzona Products (5)
About Chutes & Hoppers
Abrasive wear on chute floors, sliding-flow side walls, and hopper liners drives most of the maintenance scope on bulk-material handling assets. Belzona's ceramic-filled and elastomeric repair systems rebuild the lost wear plate profile and apply a sacrificial wear surface that is replaceable on the same outage cycle.
Explore all Chutes & Hoppers applicationsRelated Chutes & Hoppers applications (11)
Have this on your asset?
Our Houston-based team will recommend the right Belzona system and supply or apply it, with 24-hour support, no shutdown, no hot work. We serve Houston, the Texas Gulf Coast, South Texas, and offshore in the Gulf from our Alvin, Texas headquarters.