Overview
Flange encapsulation & sealing is a Gaskets, Seals & Shims application handled with cold-applied Belzona repair composites and protective coatings, supplied and applied in place, typically with no hot work and no shutdown. As the authorized Belzona distributor for South Texas and the Gulf, our team specifies the right system, then supplies it, applies it, or both.
Recommended systems for this work include Belzona 8411.
What tends to go wrong in Gaskets, Seals & Shims: Flange face deformation from heat distortion, corrosion, or fastener over-torque. Gasket leakage caused by an out-of-flat sealing surface.
What this covers
- Encapsulation of flanges, fastenings, and pipework as part of the Belzona Flange Sealing Solution
Recommended Belzona Products (1)
About Gaskets, Seals & Shims
Gasket, seal, and shim work is constrained by dimensional tolerance: the gasket has to seat in millimeters, the shim has to land at the correct thickness, and the seal has to hold the system pressure on a face that has not been milled in years. Belzona's form-in-place compounds are specified against those tolerances.
Explore all Gaskets, Seals & Shims applicationsRelated Gaskets, Seals & Shims applications (6)
Have this on your asset?
Our Houston-based team will recommend the right Belzona system and supply or apply it, with 24-hour support, no shutdown, no hot work. We serve Houston, the Texas Gulf Coast, South Texas, and offshore in the Gulf from our Alvin, Texas headquarters.